MARTINDALE MM84 Guia do Utilizador descarregar pdf (Página 26)

Multimeters & Clamp Meters

True RMS Multimeter MM84

Display: 4½ digit display with large

17mm digits.

AC V: 10μV to 750V (5 ranges)

(50Hz to 500Hz) True RMS

AC A: 10μA to 20A (5 ranges)

(50 Hz to 500Hz) True RMS

DC V: 10μV to 1000V(5 ranges)

DC A: 0.10μA to 20A (5 ranges)

The 20A inputs have a fuse which

will blow after 30 seconds

Ohms: 10mΩ to 20MΩ (6 ranges)

Continuity: Buzz at < 150Ω

Diode Test

Logic Test: Hi 2.8V ± 0.8V

Lo 0.8V ± 0.5V

Frequency: 0.1Hz to 200kHz

(3 ranges)

Dimensions: 189 x 87 x 37mm

Includes: test leads (TL16), holster,

battery & manual

This is Martindale’s top of the range multimeter. It

combines a large 4½ digit display with a basic

accuracy of 0.05% and true RMS capability.

It accurately measures the frequency of mains

supplies and up to 20A AC or DC. It also has a

continuity buzzer, an audible wrong range warning and

data hold to freeze the current reading.

This combination of high specification and broad

capabilities make it outstanding value for money.

MARMM84 true RMS multimeter £139.00

TC2B calibration £39.00

MARTL55 optional fused test leads £32.40

Clamp Adaptor CT60

DC CURRENT

Ranges: 0 - 600A

Accuracy: ± 2% + 2A

AC CURRENT:

50Hz - 400Hz

Ranges: 0 - 600A

Accuracy:

0 - 400A ± (2% reading + 2A)

400A - 500A ± (3% reading + 2A)

500A - 600A ± (6% reading + 1A)

Accuracy: apply at 23°C ±5°C and

70% RH max

OUTPUT: 0 - 600mV for 0 - 600 A

(AC/DC)

Operating environment:

0°C to 50°C at <70% RH

Storage: -20°C to 70°C max at

<80% RH

Low Battery Indication

Zero Adjust

Connection: fits all standard

multimeters with 4mm sockets

Conductor size: 30mm max

Dimensions: 178 x 70 x 33mm

Weight: 290g approx

A general purpose 600A AC/DC current clamp

adaptor, suitable for use with multimeters having

0 - 600mV AC/DC capability.

The unit is supplied with a flying lead, terminated with

4mm plugs which fit into the voltage and

common/earth inputs of a multimeter having an input

resistance of 10kΩ or greater.

The CT60 converts AC or DC current to AC or DC

voltages at the rate of 1mV per amp allowing a direct

amp reading from the meter.

This adaptor is compatible with all Martindale

multimeters except for the MM53.

MARCT60 600A clamp adaptor £75.00

TC2A calibration £27.00

electricians

kits also

available see

page 14

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comentários a estes Manuais

Sem comentários

MARTINDALE MM84 Guia do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros MARTINDALE MM84